If the crack is in a repairable location, use a C-clamp to squeeze the handle together after applying the glue. This glue is some strong stuff, but it may or may not work, depending on where the crack is. If you don’t want to buy a replacement handle, you can try fixing the crack with two-part epoxy glue. If you find any, there’s a good chance that the handle is the root of the issue. Next, examine the handle for cracks and splits throughout. Remove it from the valve stem by unthreading the screw and removing it altogether. First, make sure the handle is the problem. If you’re committed to fixing things the right way the first time, here’s how to fix the handle. While this won’t work as a permanent fix, it should buy you some time. Once you apply the tape, fit the handle back onto the stem. The key here is to get the handle to sit tightly in place, but not too tight, or the handle won’t fit back on the stem. Wrap about three or four turns of plumbing tape around the valve stem. Note: This is only a temporary fix and won’t solve the problem indefinitely. If this is the only shower in your home and you need it now but don’t have the time to go out and get parts, try this temporary fix. In some scenarios, tightening the screw won’t do the trick. Don’t overtighten the screw, as that could strip the threads, which will bring you back to square one, but with a trickier fix. Reinsert the screw, then tighten it into place. Before you tighten it, remove it entirely and apply some thread-locking compound to the threads, which will prevent this from happening again. ![]() If so, all you need to do is tighten the screw with your hex wrench or screwdriver. Sometimes, the screw manages to work its way out slightly, allowing the handle to spin instead of catching as it should. For side mount screws, you’ll probably need a hex wrench (Allen wrench), but for top mount screws, you’ll probably need a screwdriver. Once you find it, remove the cap to expose the set screw. If you have a lever-style shower handle, the cap is usually under the lever, which requires more searching. Generally, the cap sits at the front of the knob and displays the manufacturer’s logo or a red and blue circle (indicating hot and cold). Using a flathead screwdriver, gently pry off the cap that covers the set screw holding the handle in place. In some cases, this might correct the problem altogether, saving you the trouble of replacing a valve stem or broken handle. Tighten The Set Screwīefore we go overboard working on these fixes, let’s try a quick fix first. ![]() On the flip side, if a stripped valve stem is the problem, the repair is a bit more involved.īefore you call a plumber, try these fixes. If the handle is faulty, the fix is pretty straightforward. Now that we’ve addressed the potential culprits of the issue, we can move on to the fixes. Unfortunately, you can’t typically replace just the shower valve stem itself you’ll need to buy a complete replacement of the valve. When this happens, you’ll have to replace the entire valve. However, in other cases, the knob spins freely on its axis because of stripped parts. If this is the problem, all you’ll need to do is replace the handle. When the handle cracks, it doesn’t provide the tension necessary to turn the water on. Many shower faucets feature plastic knobs that are susceptible to damage over time. In some cases, the culprit may be a faulty handle. If your shower knob performs a mini-ballet dance, complete with multiple twirls every time you try to turn the water on, a few things might be happening.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |